Technical Papers & Journals

Search	Search by Format	Search by Year		Search by Price

	Price
Curing Cancer Through Metrology Volume 7, Issue 2 Ray Ryan ECM Global Measurements Solutions, provider of quality dimensional metrology and engineering support services, is working with ProTom International, developer and manufacturer of medical technology, to install a state-of-the-art proton therapy treatment... Citation: Ray Ryan, "Curing Cancer Through Metrology," The Journal of the CMSC, Vol. 7, No. 2, Autumn 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
Autumn 2012 Entire Issue Volume 7, Issue 2 Karl Christensen, Robert Flynn, Christoph Ohrt, Steffen Matthias, Markus Kaestner, Eduard Reithmeier, Paul Huang, Rich Eckenrode, Robert P. Elliott, Jr., Ray Ryan Developing a Control Network Crossing a Thermal Boundary: A Wing Jig Case Study with Best Practices, Fast Endoscopic Geometry Measurement with Fiber-Based Fringe Projection for Inner Geometries, Using MBE Data in Quality Planning Processes, Measurement Accuracy of a Mirrored Surface Using a Laser Tracker, Curing Cancer Through Metrology Citation: The Journal of the CMSC, Vol. 7, No. 2, Autumn 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
A Best-Fit Method to Maximize Conformance to Tolerance in Surface Coordinate Metrology Volume 7, Issue 1 Ahmad Barari This article discusses that the deviation zone of a profile cannot be computed only by using the Euclidian distances of the discrete measured points from substitute geometry and without considering the desired tolerance zone of the profile. The importance... Citation: Ahmad Barari, "A Best-Fit Method to Maximize Conformance to Tolerance in Surface Coordinate Metrology," The Journal of the CMSC, Vol. 7, No. 1, Spring 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
Spring 2012 Entire Issue Volume 7, Issue 1 John K. Villanueva, Xiaoyin Zhu, Chang Jin Oh, Matthew J. Novak, James H. Burge, Russell M. Kurtz, Ryder Nesbitt, Ahmad Barari, William G. Jansma National Ignition Facility: Drive Diagnostic Kinematic Mount Assembly Plate System Characterization, Alignment, and Installation, Structural Inspection of an Astronomical Wide Field Corrector with a Portable Coordinate Measuring Machine, Enhanced Surface Metrology, A Best-Fit Method to Maximize Conformance to Tolerance in Surface Coordinate Metrology, An Improvised Two-Dimensional Laser Surface Scanner for Diagnosis of RF Thermionic Electron Gun Problems Citation: The Journal of the CMSC, Vol. 7, No. 1, Spring 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
National Ignition Facility: Drive Diagnostic Kinematic Mount Assembly Plate System Characterization, Alignment, and Installation Volume 7, Issue 1 John K. Villanueva The National Ignition Facility (NIF), a program of the U.S. Department of Energy's National Nuclear Security Administration (NNSA), focused the intense energy of 192 giant laser beams on a BB-sized target filled with hydrogen fuel, fusing the hydrogen... Citation: John K. Villanueva, "National Ignition Facility: Drive Diagnostic Kinematic Mount Assembly Plate System Characterization, Alignment, and Installation," The Journal of the CMSC, Vol. 7, No. 1, Spring 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
Structural Inspection of an Astronomical Wide Field Corrector with a Portable Coordinate Measuring Machine Volume 7, Issue 1 Xiaoyin Zhu, Chang Jin Oh, Matthew J. Novak, James H. Burge Accurate assembly characterization is critical to the proper assembly and alignment of optical systems, such as the Hobby-Eberly Telescope wide field corrector (WFC). The WFC is comprised of four mirrors built into a steel structural housing, with a... Citation: Xiaoyin Zhu, Chang Jin Oh, Matthew J. Novak, James H. Burge, "Structural Inspection of an Astronomical Wide Field Corrector with a Portable Coordinate Measuring Machine," The Journal of the CMSC, Vol. 7, No. 1, Spring 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
Enhanced Surface Metrology Volume 7, Issue 1 Russell M. Kurtz, Ryder Nesbitt The constant search for more accurate measurement generally leads to higher cost, greater complexity, and/or devices that do not lend themselves to manufacturing environments. For example, surface metrology can be accomplished by a number of methods,... Citation: Russell M. Kurtz, Ryder Nesbitt, "Enhanced Surface Metrology," The Journal of the CMSC, Vol. 7, No. 1, Spring 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
An Improvised Two-Dimensional Laser Surface Scanner for Diagnosis of RF Thermionic Electron Gun Problems Volume 7, Issue 1 William G. Jansma The U.S. Department of Energy’s Advanced Photon Source (APS) at Argonne National Laboratory is a particle accelerator that produces brilliant X-rays for scientific research. To produce X-rays, electrons are accelerated and circulated in a ring 1,104... Citation: William G. Jansma, "An Improvised Two-Dimensional Laser Surface Scanner for Diagnosis of RF Thermionic Electron Gun Problems," The Journal of the CMSC, Vol. 7, No. 1, Spring 2012
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
Mathematical Corrections Applied to Laser Radar Measurements Made Through a Cryogenic Vacuum Chamber Window Volume 6, Issue 2 Joseph Hayden, Bente Eegholm, David Kubalak, Theodore Hadjimichael, Raymond Ohl, Randal Telfer Laser radar (LR) measurements were made through a vacuum chamber window for cryogenic metrology of targets attached to two different alignment fixtures used for the James Webb Space Telescope. The range and pointing errors imparted on the LR beam,... Citation: Joseph Hayden, Bente Eegholm, David Kubalak, Theodore Hadjimichael, Raymond Ohl, Randal Telfer, "Mathematical Corrections Applied to Laser Radar Measurements Made Through a Cryogenic Vacuum Chamber Window," The Journal of the CMSC, Vol. 6, No. 2, Autumn 2
	Download Members: $0.00 Non‑Members: $75.00	Buy Now
Reducing Engineering Time for Compensation of Large CNC Machines Volume 6, Issue 2 Rob Flynn Machine compensation challenges increase with machine size. Increased production of large CNC machines led to the pursuit of improved methods for machine compensation. These methods included the use of volumetric compensation, implementation of a custom... Citation: Rob Flynn, "Reducing Engineering Time for Compensation of Large CNC Machines," The Journal of the CMSC, Vol. 6, No. 2, Autumn 2011
	Download Members: $0.00 Non‑Members: $75.00	Buy Now